TMV survey for buildings and portfolios with no reliable records
TMV Servicing Specialists arranges TMV surveys across the UK for buildings and portfolios where nobody is sure how many thermostatic mixing valves there are or what state they are in. A partner engineer finds each valve, identifies it, checks its condition and access, and records what should happen next.
Start with knowing what you have
You cannot test, service or budget for valves you do not know about. Many organisations inherit buildings with TMVs fitted over decades by different contractors, some in plant cupboards, some under basins, some boxed in where nobody has looked since the bathroom was tiled. A TMV survey produces the list everything else depends on: where each valve is, what it is, which outlet it serves, and whether it is fit for that setting.
It suits new owners and managing agents taking on a building, care and health providers preparing for inspection, housing providers with mixed stock, schools after an academy transfer, and anyone whose valve records are missing, out of date or contradictory. It is often the first step for a portfolio that has no TMV records at all.
A survey records and assesses; it does not set or service valves. If you already know where every valve is and only need readings, a test is quicker. If you want valves tested at the same time as they are found, the survey can include temperature and fail-safe checks, which turns it into a first baseline as well as an inventory.
What a survey looks at
The scope is agreed beforehand. A typical survey records the following for each outlet and valve.
- Every outlet checkedBasins, baths, showers and bidets are walked room by room, so outlets that should have a valve but do not are picked up as well as those that do.
- Hidden and remote valvesValves behind panels, in ducts, above ceilings or in plant rooms serving outlets elsewhere are traced from the pipework, not just from what is visible.
- Make, type and approvalEach valve is identified where markings allow: manufacturer, model, whether it is a TMV2 or TMV3 valve, and whether it is a separate valve, thermostatic tap or shower control.
- Suitability for the settingThe approval is compared with the users and outlet type, so domestic-type valves serving care residents or similar mismatches are flagged.
- Condition and age indicatorsVisible corrosion, leaks, scale, missing caps and signs of tampering are noted, along with whether parts for the model are still made.
- Access and isolationWhether the valve can be reached without opening finishes, and whether it has isolators and strainers on its supplies.
- Risk notesLong runs of mixed water, valves serving several outlets, outlets used by vulnerable people with no valve, and outlets that look little-used are recorded.
- Report and recommendationsA list per valve with location, details and recommended action, from routine testing through to access work, replacement or new installation.
Preparing for a survey
-
Access to every room and void
Keys for plant rooms, ceiling hatches and locked rooms, and permission to remove screwed panels, make the survey complete in one go.
-
Any drawings or old records
Even partial information shows where to look and lets the survey check what has changed.
-
Decide whether to include testing
Surveying only is quicker. Adding temperature and fail-safe checks takes longer but gives a reading for every valve that can be reached.
-
Agree the format of the output
Say whether you need a spreadsheet, a report per building or entries ready for an asset register, so the results fit how you manage your properties.
Good to know about TMV surveys
-
Hidden valves are the usual surprise
Valves are often found that nobody knew were there, and outlets assumed to be protected sometimes are not. That is the point of looking.
-
Identification is not always possible
Some older valves carry no visible markings. The survey records what can be confirmed and notes where the make or approval is unknown.
-
Risk assessments need the list
Your Legionella risk assessment under ACOP L8 and HSG274, and your scald risk assessment, both depend on knowing where mixing valves and mixed-water runs are.
-
A survey sets priorities
The recommendations help separate urgent items, such as an unprotected bath used by residents, from routine work that can join a planned programme.
How a survey is arranged
- 1
Outline the buildings
Use the enquiry form to describe the buildings, their use, roughly how many outlets there are and what records exist.
- 2
Alex allocates the work
Alex matches each building to a partner engineer covering that area.
- 3
Scope and price confirmed
The scope, including whether testing is included, and the price are agreed with you before the survey starts.
- 4
Room-by-room survey
The engineer works through the building, finding and recording every valve and outlet.
- 5
Report delivered
You receive the valve list, condition and access notes, risk notes and recommendations, ready to plan the next steps.
Questions about TMV surveys
Why do we need a survey if we already test our valves?
Only if your list may be incomplete. Testing covers the valves you know about; a survey finds the ones you do not.
How are hidden valves found?
By tracing pipework back from outlets, checking ducts, voids and plant spaces, and looking for valves that serve more than one outlet from a distance.
Can the survey tell us if valves are the wrong type?
Yes, where the valve can be identified. Each approval is compared with the outlet and its users, and mismatches are flagged.
Does a survey include testing?
It can. Adding temperature and fail-safe checks gives a reading for every reachable valve, at the cost of a longer visit.
What do we get at the end?
A list of every valve and outlet surveyed with location, details, condition, access, risk notes and recommended action.
How is a survey priced?
By the number of buildings and outlets, access and whether testing is included. The price is agreed before the survey starts.
What comes after a survey
No idea how many valves you have?
Describe your buildings and what records exist. Alex will match the survey to a partner engineer and confirm the scope and price before it starts.
Send an enquiry