Thermostatic shower valve servicing
TMV Servicing Specialists services thermostatic shower valves, both exposed bar mixers and concealed valves, across the UK. A thermostatic shower mixer is a TMV built into the shower control, and it needs the same care as one hidden in a cupboard. A partner engineer cleans, tests and resets it so the shower runs at a steady, safe temperature.
Why a thermostatic shower mixer needs servicing
A thermostatic shower valve, whether a bar mixer on the wall or a concealed valve behind tiles with only the handles showing, contains a thermostatic cartridge doing exactly what a separate TMV does: blending hot and cold to a set temperature and reacting when one supply changes. Because it is part of the shower rather than tucked away, people tend to treat it as a fitting and forget it needs maintaining. Over time scale builds up on the cartridge and in the small inlet filters, and the shower stops behaving.
Typical signs are a shower that creeps hotter or colder during use, one that will not reach a comfortable temperature, a control that is stiff or turns without effect, weak flow from one side, or a temperature that jumps when someone runs a tap elsewhere. In hard water areas this can happen within a few years. These valves are found in homes, rented flats, hotels, gyms, student rooms and care settings, and in occupied buildings they often serve rooms that cannot be out of use for long.
This service suits individual or multiple thermostatic shower mixers. If the shower is fed by a separate TMV in a cupboard or duct, that valve needs servicing as a TMV. Electric showers are a different appliance altogether. Where a shower block runs from one large valve serving several heads, the blending valves page is the right place to look.
A shower valve service includes
The engineer works at the shower itself, usually without lifting tiles. On a typical visit:
- Temperature and flow checkRunning the shower and measuring the delivered temperature at the head, at full flow and part flow, before any work.
- IsolationShutting off the integral service valves, or the local isolators, so the cartridge can be removed safely.
- Inlet filter cleaningRemoving and cleaning the small filters or strainers at the hot and cold inlets of the mixer body.
- Cartridge descale or replacementDescaling and lubricating the thermostatic cartridge with suitable grease, or fitting a replacement where it is worn or seized.
- Check valvesInspecting the non-return valves that stop hot water crossing into the cold side, a cause of temperature creep.
- Anti-scald stopResetting the temperature limit stop on the handle, so the button that overrides it cannot exceed the safe maximum.
- Fail-safe testIsolating the cold supply to confirm the shower stops or drops to a trickle, then restoring it and checking the temperature settles.
Plan before the engineer arrives
-
Make and model
A photo of the valve and any brand on the handle helps the engineer bring the right cartridge or seals.
-
Is it bar or concealed?
Concealed valves need access to the cartridge through the wall plate; a few older designs only open up from behind.
-
Occupied rooms
In hotels, care homes and student blocks, list which rooms are free and when, so showers are out of use for the shortest time.
-
Supply type
A pumped, unvented or combination boiler supply changes the pressure balance at the valve, which affects how it performs.
Things worth knowing about thermostatic showers
-
Temperature creep has several causes
A scaled cartridge, a stuck check valve and unequal hot and cold pressures can all make a shower drift. Testing each in turn finds the real cause before parts are changed.
-
Shower limits in care settings
Guidance based on D 08 commonly quotes a 41°C maximum at showers where vulnerable people bathe, and TMV3 approval is normally expected there.
-
Little-used showers and Legionella
Showers produce spray that can be inhaled, so those that go unused should be flushed regularly, commonly weekly, and heads and hoses kept clean as HSG274 Part 2 describes.
-
Spares do run out
Older or unbranded mixers can be hard to find cartridges for. Where that happens, replacing the valve may be the only lasting fix.
Getting a shower valve serviced
- 1
Tell us about the showers
Use the form to say how many thermostatic showers there are, what type and what they are doing.
- 2
Alex finds a partner engineer
The job goes to a partner engineer who covers your location and services shower mixers.
- 3
Price set out in advance
The cost depends on the number of valves, access and whether cartridges are needed; it is agreed before work starts.
- 4
Service and test
Each shower is serviced and tested, then put back into use.
- 5
Your record of the work
You should expect temperature readings, the fail-safe result and any recommendations for each shower.
Thermostatic shower valve questions
Is a thermostatic shower valve a TMV?
Yes. It contains a thermostatic mixing cartridge and does the same job, so it needs servicing and testing in the same way as a TMV in a cupboard.
Why does my shower get hotter the longer it runs?
Usually scale on the cartridge, a passing check valve or unbalanced supply pressures. Servicing the cartridge and checking the supplies normally finds which.
Can a concealed valve be serviced without removing tiles?
In most cases yes, through the front once the handles and plate are off. A minority of designs need rear access.
How long is the shower out of use?
Typically only while that valve is isolated and serviced, which is usually a short part of the visit.
What is the safety button on the handle for?
It is the anti-scald stop. It limits the temperature unless pressed, and the engineer sets the limit so even the override stays safe.
Should a shower with a thermostatic mixer also have a TMV?
Normally not. Two thermostatic controls on one outlet can fight each other, so one well-maintained thermostatic valve is the usual approach.
Do you replace shower valves?
Yes, when a valve cannot be repaired or parts are unavailable, a partner engineer can fit a replacement and commission it.
Shower running too hot, too cold or unpredictably?
Tell us how many thermostatic showers you have and what they are doing. Alex will match the job to a partner engineer and confirm the price before the visit.
Send an enquiry