TMV servicing
A routine service and check: readings at the outlet, a fail-safe test, a light clean and a record of what was found.
More about TMV servicingTMV servicing across the UKTMV servicing · England · Scotland · Wales · Northern Ireland
Quick online enquiryThermostatic mixing valve specialists
TMV Servicing Specialists services, tests, replaces and maintains thermostatic mixing valves for homes and businesses across the UK, keeping hot water at a safe temperature.
Each of these is about the valve itself. Tell us which one you need and we will confirm the work before we start.
Not sure which you need? Just ask
A routine service and check: readings at the outlet, a fail-safe test, a light clean and a record of what was found.
More about TMV servicing
The valve taken apart, the cartridge and internals descaled, worn seals replaced and the temperature reset. Suits older valves that have drifted.
More about full strip-down service
A failed, obsolete or wrong-type valve taken out and a suitable one fitted to the same pipework, then commissioned.
More about TMV replacement
Outlet temperatures and the fail-safe test, recorded against the set temperature. Suits landlords and premises managers.
More about TMV testing
A schedule of tests and services for buildings with several valves, so each one is looked at before it fails.
More about planned TMV maintenanceIf your job does not fit one of these, say what the valve is doing and we will tell you what it needs.
More valve work
Alex runs TMV Servicing Specialists, a firm that works only on thermostatic mixing valves. We arrange servicing, testing, replacement and ongoing maintenance for homes and businesses across the UK, through partner engineers in every part of the country, so hot water stays at the safe temperature it is set to.
Every job is about the valve itself, nothing else. You deal with us from the first message to the finished paperwork.
Choosing a firm for a valve is simple when the firm does one job well. Here is how we work and what you can expect from us.
We take on thermostatic mixing valve work and nothing else, so your enquiry is never one job among boilers and bathrooms.
The valve is tested and you are told what was found, what was changed and what still needs attention.
The work is aimed at keeping hot water at the safe temperature the valve is set to hold.
The same five steps whether you have one valve at home or a building full of them.
Use the form to tell us where the valves are, roughly how many there are and what you need. A photo of the valve and its label helps.
Alex reads every enquiry and matches the job to a partner engineer who covers your part of the UK.
We confirm the work and the price before anything is booked, so nothing starts that you have not agreed.
The engineer tests, services or replaces the valves as agreed and records the readings before and after.
You get the paperwork for each valve and a note of anything that still needs attention, with the next date it is due.
Different buildings bring different users, rules and access. Each of these pages covers what matters in that setting.
Each thermostatic mixing valve is taken apart, cleaned, tested for temperature and signed off, so you know it is working as it should.
Send an enquiry
These are the practical questions most customers ask before they get in touch. If yours is not here, just ask.
The price depends on the valve, how easy it is to reach and what the work involves. Send us a photo of the valve and a short note of what you need, and we will tell you the price before anything starts.
It depends on how busy we are and when you can give us access. Tell us your timescale in your enquiry and we will say whether we can meet it.
The engineer checks the valve, tests the outlet temperature and carries out the work agreed beforehand. You are told what was found and what was done before they leave.
Have the location of the valve, the make and model if you know it, and clear access to the cupboard or space where it sits. A photo is often enough to start.
Yes. We work across England, Scotland, Wales and Northern Ireland through partner engineers, so tell us the postcode of the site in your enquiry.
Tell us which valve you have and what you need done, and we will come back to you.
Send an enquiry
Tell us what you need
Send us the make or model if you have it, the site address, and a note of any problems you have seen with the hot water. We will come back to you with what happens next.
England, Scotland, Wales and Northern Ireland