Skip to content

TMV servicing across the UK

TMV servicing for landlords and HMOs

TMV Servicing Specialists arranges TMV servicing for landlords, HMO owners and letting agents across the UK. Valves in rented homes are tested and serviced around tenants, and you receive records that help show the property is safe to live in.

A finished valve installation inside an open plant cupboard lit by a small window

Scald protection in rented homes

Landlords have a duty to keep rented homes free of serious hazards, and very hot water is one of them. A thermostatic mixing valve on a bath or shower, or a blending valve under a basin, keeps the water at a safe temperature even if the boiler or cylinder runs hot. Once fitted, those valves need periodic checks, because scale and debris make them drift or stop protecting the outlet.

This page is for private landlords with one or several properties, owners and managers of houses in multiple occupation, and letting agents managing portfolios for clients. It applies where TMVs were fitted to meet Building Regulations in a newer home or conversion, required by a licence condition, or added because a tenant is vulnerable.

If the property has no valves and you are unsure whether it needs them, a survey is the place to start. If a tenant reports water that is too hot or keeps going cold, book fault finding or repair. For an HMO with many bathrooms on a regular cycle, a maintenance contract may suit you better than one-off visits.

What a rented property visit covers

The engineer checks each valve in the property and notes anything that affects the tenant's safety.

  • Bath and shower readingsThe mixed water temperature is measured at each bath and shower fitted with a TMV, and checked against a safe setting.
  • Under-basin blending valvesSmall blending valves under basins and sinks in shared kitchens and bathrooms are located and tested.
  • Fail-safe testThe cold supply is isolated to check the valve shuts down rather than sending hot water to the outlet.
  • Cleaning and adjustmentStrainers are cleaned and drifted valves reset, with readings recorded before and after.
  • Notes on the hot water supplyStored hot water temperature is noted where reachable, as it affects both scald and Legionella risk.
  • A record per valveEach valve gets a service record, so you can file them with gas and electrical safety paperwork.
  • Remedial work listSeized, leaking or failed valves are listed with what is needed to put them right.

What to sort before booking

  • Give tenants proper notice

    Tenants are entitled to notice before access for routine work. Agree a date and time and confirm it in writing.

  • Know where the valves are

    TMVs are often behind bath panels, in airing cupboards or under basins. Note any you know about so the engineer can find them quickly.

  • Check the licence conditions

    If the HMO licence mentions hot water or TMVs, share the wording so the visit covers what the council expects.

  • Plan access to shared areas

    In HMOs, shared bathrooms and kitchens may need several tenants to be told, as well as access to the boiler or cylinder.

Good to know for landlords

  • Housing standards differ by nation

    In England the Housing Health and Safety Rating System covers hazards such as scalding, Wales applies fitness standards under its renting homes law, Scotland has the Repairing Standard, and Northern Ireland has its own fitness rules.

  • HMO licensing exists in all four nations

    Each nation licenses HMOs under its own law, and councils may attach conditions about hot water safety. Check your licence and the local authority's standards.

  • Part G applies to newer homes

    In England and Wales, Building Regulations limit hot water to baths in new homes and conversions to 48°C, which is why many newer rented homes already have a valve.

  • Records help at inspection

    A council officer or agent asking about hot water safety will want to see dated readings per valve, not just a note that valves exist.

How it works for a rental property

  1. 1

    Send an enquiry

    Use the form to give the property address area, number of bathrooms and whether it is an HMO.

  2. 2

    Engineer matched

    Alex matches the job to a partner engineer covering that part of the UK.

  3. 3

    Price before work

    The price depends on the number of valves and how easy they are to reach, and is agreed with you first.

  4. 4

    Visit with tenants in place

    The engineer attends at the agreed time and works through each outlet with as little disruption as possible.

  5. 5

    Records sent to you

    You should expect readings, fail-safe results and service records per valve, plus any further work needed.

Landlord and HMO TMV questions

See all questions

Do I have to fit TMVs in a rented property?

There is no blanket rule for every rented home. They are required on baths in new homes and conversions under Building Regulations, and may be needed by a licence condition or your own risk assessment.

How often should rental TMVs be serviced?

Many landlords have valves checked once a year, often alongside other safety checks. Hard water or a history of drift may mean more often.

Can a letting agent book on my behalf?

Yes. The agent can make the enquiry, arrange tenant access and receive the records.

Do I need to be there?

No, as long as access is arranged with the tenant or agent and someone can show where the valves and isolation points are.

What if the tenant has altered the temperature?

The engineer resets the valve to a safe setting, records it and notes the change so you can speak to the tenant.

Is this available for portfolios across the UK?

Yes. We cover the whole of the UK, so properties in different towns can be booked through one enquiry.

Book a TMV check for your rental

Tell us where the property is, how many bathrooms it has and whether it is an HMO. Alex will match a partner engineer and agree a price with you before the tenant visit is arranged.

Send an enquiry